High Speed Rolling Doors
Town Gate’s High Speed Doors are engineered for environments where efficiency, durability, and security are non-negotiable. Built with precision and advanced technology, these doors provide rapid access while maintaining safety and energy efficiency. Perfect for industrial, commercial, and high-traffic applications, they combine performance with long-lasting reliability.
High Speed Rolling Doors
High Speed solid Flat
Town Gate’s Solid Flat High Speed Doors are designed for facilities that demand speed, strength, and reliability. With a sleek solid panel design, they ensure fast access while enhancing security and energy efficiency. Ideal for industrial, commercial, and high-traffic environments, these doors deliver consistent performance and long-lasting durability.
Specifications
Door Construction
CURTAIN
Slat Profile: 3″ Solid Flat interlocking slats, 22 ga galvanized steel.
Options: Punched, perforated and grilled. Factory installed end locks or wind locks.
Finish: Galvanized, stainless steel or customizable powder-coat colors.
BOTTOM BAR
Reinforced with dual cold roll galvanized steel angles to add rigidity and durability to the curtain. Equipped with a rubber weather seal or optional sensing edge to ensure smooth, quiet operation.
Finish Options: Stainless steel or powder coated to match the curtain.
BRACKETS
Material: 3/16″ cold rolled steel or galvanized with ball bearing support
Shape: hexagon, round and square
Finish Options: Galvanized or customizable powder-coat colors.
GUIDES
Material: Built from heavy-duty structural steel angles with a minimum thickness of 3/16”, manufactured in compliance with ASTM A36 standards. Guides are bolted together using ⅜” fasteners in 1-¼” slotted connections, spaced at a maximum of 24” on center for secure installation. A precise 1” channel spacing is engineered to provide smooth and reliable curtain movement during daily operation. For enhanced performance, Town Gate includes a standard vinyl clip-on weather seal to improve durability and reduce air infiltration.
Shape: “E” shape, “F” shape and “Z” shape.
Finish Options: Galvanized or customizable powder-coat colors.
SPRINGLESS SHAFT
A maintenance-friendly springless shaft design engineered to deliver high cycle performance and reduce downtime.
The barrel and shaft size are designed according to the door’s size and speed.
HOOD
- Material: 22 ga galvanized steel hood to fully close the coil.
- Shape: hexagon, round and square
- Finish: Galvanized or customizable powder-coat colors.
LOCKING OPTIONS
- Slide bolt locks
- Cylinder locks
- Motor operator can function as lock.
FASCIA (Optional)
Recommended where the area behind the hood remains exposed. Designed to match the hood finish for a clean, professional appearance.
Uses & Applications
Applications
Town Gate high speed roll-up doors are the ideal solution for facilities that require quick, secure, and frequent access. They are widely used in:
Any location requiring fast and reliable door operation
- Loading docks and warehouses
- Shipping and receiving platforms
- Car dealerships and automotive facilities
- Parking garages
- Emergency service stations and firehouses
Functional Benefits
Fully weather-sealed construction to protect against bad weather conditions.
High-speed operation – up to 30” per second opening and 12” per second closing.
Soft start/stop technology increases product lifespan and reduces wear.
Direct drive system – no sprockets or chains that can wear over time.
Wind load performance – designed to withstand static and operational wind pressures.
Standard safety features – including light curtains and photo-eyes to ensure protection.
High durability – tested for up to 400,000 operational cycles.
Optional features:
- Vision panels for visibility
- Monitored sensing edge
Town Gate Advantage and Benefit
Engineered for performance – built to operate smoothly with minimal maintenance.
Custom-made design – every high speed door is manufactured to exact specifications, ensuring a perfect fit for your project.
Strong yet compact – rigid construction with reduced overhead obstruction.
Proven reliability – backed by decades of combined industry expertise and successful installations.
Peace of mind – two-year warranty on materials and workmanship, with extended warranty options available.
Installation Overview
Town Gate doors are built for quick and clean installation in standard masonry or framed openings.
Rolling steel doors are engineered to be durable, strong, and cost-effective—both in installation and long-term maintenance.
Please note: Preparation of openings, structural or miscellaneous steel work, access doors, finish or on-site painting Town Gate installation team can do it if need it.
Electrical wiring, conduit, fuses, and disconnect switches, fall under the responsibilities of other contractors or trades involved in the project.
Operation
- Town Gate high Speed Motor is a heavy-duty direct drive designed for continuous operation. It features electronic dynamic braking with a solenoid mechanical brake, eliminating the need for sprockets or chains. An emergency chain hoist is included for emergency use during power outages. The Variable Frequency Drive ensures smooth performance with soft start and stop.
Town Gate’s high-speed door operator is built to meet CE standards, using only top-quality materials and advanced technology. Designed for reliability and performance, our roll-up door motors consistently go beyond industry requirements.
High Speed Punched
Town Gate’s Punched High Speed Doors are designed to deliver speed and visibility without compromising strength. The punched slats allow natural light and airflow while ensuring security and durability. Ideal for retail, commercial, and industrial spaces, these doors combine rapid access with modern functionality and long-lasting performance.
Specifications
Door Construction
CURTAIN
Slat Profile: 3″ flat punched interlocking slats, 22 ga galvanized steel.
Options: Solid “flat”, Perforated and grilled. Factory installed end locks or wind locks.
Finish: Galvanized or customizable powder-coat colors.
BOTTOM BAR
Reinforced with dual cold roll galvanized steel angles to add rigidity and durability to the curtain. Equipped with a rubber weather seal or optional sensing edge to ensure smooth, quiet operation.
Finish Options: Stainless steel or powder coated to match the curtain.
BRACKETS
Material: 3/16″ cold rolled steel or galvanized with ball bearing support
Shape: hexagon, round and square
Finish Options: Galvanized or customizable powder-coat colors.
GUIDES
Material: Built from heavy-duty structural steel angles with a minimum thickness of 3/16”, manufactured in compliance with ASTM A36 standards. Guides are bolted together using ⅜” fasteners in 1-¼” slotted connections, spaced at a maximum of 24” on center for secure installation. A precise 1” channel spacing is engineered to provide smooth and reliable curtain movement during daily operation. For enhanced performance, Town Gate includes a standard vinyl clip-on weather seal to improve durability and reduce air infiltration.
Shape: “E” shape, “F” shape and “Z” shape.
Finish Options: Galvanized or customizable powder-coat colors.
SPRINGLESS SHAFT
A maintenance-friendly springless shaft design engineered to deliver high cycle performance and reduce downtime.
The barrel and shaft size are designed according to the door’s size and speed.
HOOD
- Material: 22 ga galvanized steel hood to fully close the coil.
- Shape: hexagon, round and square
- Finish: Galvanized or customizable powder-coat colors.
LOCKING OPTIONS
- Slide bolt locks
- Cylinder locks
- Motor operator can function as lock.
FASCIA (Optional)
Recommended where the area behind the hood remains exposed. Designed to match the hood finish for a clean, professional appearance.
Uses & Applications
Applications
Town Gate high speed roll-up doors are the ideal solution for facilities that require quick, secure, and frequent access. They are widely used in:
Any location requiring fast and reliable door operation
- Loading docks and warehouses
- Shipping and receiving platforms
- Car dealerships and automotive facilities
- Parking garages
- Emergency service stations and firehouses
Functional Benefits
Fully weather-sealed construction to protect against bad weather conditions.
High-speed operation – up to 30” per second opening and 12” per second closing.
Soft start/stop technology increases product lifespan and reduces wear.
Direct drive system – no sprockets or chains that can wear over time.
Wind load performance – designed to withstand static and operational wind pressures.
Standard safety features – including light curtains and photo-eyes to ensure protection.
High durability – tested for up to 400,000 operational cycles.
Optional features:
- Vision panels for visibility
- Monitored sensing edge
Town Gate Advantage and Benefit
Engineered for performance – built to operate smoothly with minimal maintenance.
Custom-made design – every high speed door is manufactured to exact specifications, ensuring a perfect fit for your project.
Strong yet compact – rigid construction with reduced overhead obstruction.
Proven reliability – backed by decades of combined industry expertise and successful installations.
Peace of mind – two-year warranty on materials and workmanship, with extended warranty options available.
Installation Overview
Town Gate doors are built for quick and clean installation in standard masonry or framed openings.
Rolling steel doors are engineered to be durable, strong, and cost-effective—both in installation and long-term maintenance.
Please note: Preparation of openings, structural or miscellaneous steel work, access doors, finish or on-site painting Town Gate installation team can do it if need it.
Electrical wiring, conduit, fuses, and disconnect switches, fall under the responsibilities of other contractors or trades involved in the project.
Operation
- Town Gate high Speed Motor is a heavy-duty direct drive designed for continuous operation. It features electronic dynamic braking with a solenoid mechanical brake, eliminating the need for sprockets or chains. An emergency chain hoist is included for emergency use during power outages. The Variable Frequency Drive ensures smooth performance with soft start and stop.
Town Gate’s high-speed door operator is built to meet CE standards, using only top-quality materials and advanced technology. Designed for reliability and performance, our roll-up door motors consistently go beyond industry requirements.
High Speed Perforated
Town Gate’s Perforated High Speed Doors combine rapid operation with ventilation and visibility. The perforated design allows airflow and light transmission while maintaining strength and security. Perfect for warehouses, retail, and commercial applications where speed, durability, and functionality matter most.
Specifications
Door Construction
CURTAIN
Slat Profile: 3″ perforated flat interlocking slats, 22 ga galvanized steel.
Options: Solid “flat”, Punched and grilled. Factory installed end locks or wind locks.
Finish: Galvanized or customizable powder-coat colors.
BOTTOM BAR
Reinforced with dual cold roll galvanized steel angles to add rigidity and durability to the curtain. Equipped with a rubber weather seal or optional sensing edge to ensure smooth, quiet operation.
Finish Options: Stainless steel or powder coated to match the curtain.
BRACKETS
Material: 3/16″ cold rolled steel or galvanized with ball bearing support
Shape: hexagon, round and square
Finish Options: Galvanized or customizable powder-coat colors.
GUIDES
Material: Built from heavy-duty structural steel angles with a minimum thickness of 3/16”, manufactured in compliance with ASTM A36 standards. Guides are bolted together using ⅜” fasteners in 1-¼” slotted connections, spaced at a maximum of 24” on center for secure installation. A precise 1” channel spacing is engineered to provide smooth and reliable curtain movement during daily operation. For enhanced performance, Town Gate includes a standard vinyl clip-on weather seal to improve durability and reduce air infiltration.
Shape: “E” shape, “F” shape and “Z” shape.
Finish Options: Galvanized or customizable powder-coat colors.
SPRINGLESS SHAFT
A maintenance-friendly springless shaft design engineered to deliver high cycle performance and reduce downtime.
The barrel and shaft size are designed according to the door’s size and speed.
HOOD
- Material: 22 ga galvanized steel hood to fully close the coil.
- Shape: hexagon, round and square
- Finish: Galvanized or customizable powder-coat colors.
LOCKING OPTIONS
- Slide bolt locks
- Cylinder locks
- Motor operator can function as lock.
FASCIA (Optional)
Recommended where the area behind the hood remains exposed. Designed to match the hood finish for a clean, professional appearance.
Uses & Applications
Applications
Town Gate high speed roll-up doors are the ideal solution for facilities that require quick, secure, and frequent access. They are widely used in:
Any location requiring fast and reliable door operation
- Loading docks and warehouses
- Shipping and receiving platforms
- Car dealerships and automotive facilities
- Parking garages
- Emergency service stations and firehouses
Functional Benefits
Fully weather-sealed construction to protect against bad weather conditions.
High-speed operation – up to 30” per second opening and 12” per second closing.
Soft start/stop technology increases product lifespan and reduces wear.
Direct drive system – no sprockets or chains that can wear over time.
Wind load performance – designed to withstand static and operational wind pressures.
Standard safety features – including light curtains and photo-eyes to ensure protection.
High durability – tested for up to 400,000 operational cycles.
Optional features:
- Vision panels for visibility
- Monitored sensing edge
Town Gate Advantage and Benefit
Engineered for performance – built to operate smoothly with minimal maintenance.
Custom-made design – every high speed door is manufactured to exact specifications, ensuring a perfect fit for your project.
Strong yet compact – rigid construction with reduced overhead obstruction.
Proven reliability – backed by decades of combined industry expertise and successful installations.
Peace of mind – two-year warranty on materials and workmanship, with extended warranty options available.
Installation Overview
Town Gate doors are built for quick and clean installation in standard masonry or framed openings.
Rolling steel doors are engineered to be durable, strong, and cost-effective—both in installation and long-term maintenance.
Please note: Preparation of openings, structural or miscellaneous steel work, access doors, finish or on-site painting Town Gate installation team can do it if need it.
Electrical wiring, conduit, fuses, and disconnect switches, fall under the responsibilities of other contractors or trades involved in the project.
Operation
- Town Gate high Speed Motor is a heavy-duty direct drive designed for continuous operation. It features electronic dynamic braking with a solenoid mechanical brake, eliminating the need for sprockets or chains. An emergency chain hoist is included for emergency use during power outages. The Variable Frequency Drive ensures smooth performance with soft start and stop.
Town Gate’s high-speed door operator is built to meet CE standards, using only top-quality materials and advanced technology. Designed for reliability and performance, our roll-up door motors consistently go beyond industry requirements.
Our Projects
Explore our installations in action