Curtain

• Slat Profile: 4″ Solid curved interlocking slats, 22 ga galvanized steel.
• Options: Punched, perforated and grilled. Factory installed end locks or wind locks.
• Finish: Galvanized or customizable powder-coat colors.

Bottom Bar

• Standard includes a single or double angle galvanized bottom bar

Brackets

• Material: 14 ga stamped steel, cold rolled steel or galvanized
• Shape:  hexagon, round and square
• Finish Options: Galvanized or customizable powder-coat colors.

Guides

• Material: Wall mounting angle 1/8″x2″x2″ carbon steel.
• Shape: 2 1/2 ” Roll form guide.
• Finish Options: Galvanized or customizable powder-coat colors.

Counterbalance Assembly

• Material: Flat blue steel spring, 2″ steel pipe and 8″ spring box with ball bearing.
• Assemble: Wrapped around a 2” pipe shaft and mounted into an 8” spring box.
• Finish Options: Galvanized or customizable powder-coat colors.

Hood / Coil Housing

• Material: 22 ga galvanized steel hood to fully close the coil.
• Shape:  hexagon, round and square
• Finish: Galvanized or customizable powder-coat colors.

Note: Hood not recommended abobe the celling

Locking Devices

Standard: Left and right locking pins for pad lock.

Optional: Slide lock on bottom bar.

Applications

Town Gate manual push-up doors with solid curve slat are the ideal security solution for a wide range of commercial and service environments where durability, manual operation, and aesthetic appeal are the key Like:
Retail Storefronts, Shopping Mall Units, Pharmacies and Convenience Stores, Coffee Shops and Take-Out Restaurants, Storage Rooms and Service Closets, Reception or Cashier Windows in Medical Clinics or Parking Facilities.

Functional Benefits

Locking Options
Comes standard with Both sides pins locks for padlock use. Optional slide locks can be added for increased security.

Durable Curtain Slats Assembly
Constructed from 22-gauge galvanized steel, our 4” interlocking solid curved slat with end lock or wind lock, offer excellent resistance to forced entry and wear. Optional punched slats and reinforcement plates are also available.

Manual Lift Operation
No motor needed. Designed for simple, daily manual operation using a push-up method with ergonomic handling as an option this gate can be motorized, Town Gate offer a central motor build exclusive for this type of door.

Custom Finish Options
Choose from our Powder coating colors to match your brand or storefront aesthetic.

High-Quality Hardware
Equipped with 14-gauge steel brackets (15” hex shape), roll-formed 14-gauge side guides, and a galvanized hood for superior durability.

Town Gate Advantage and Benefit

Town Gate manual push up door was Ingenierie design to minimize friction percentage (%) to ensure easy operation and minimize maintenance required.

After 48 years of combined industry experience, our team has delivered high-performance rolling doors across countless retail and commercial installations. Our reputation is founded on consistent work quality, precision, and customer-first service.

Each door is custom manufactured to meet your exact dimensions, layout, and usage needs. The solid curve slat is design to offer a compact yet highly durable build, reducing ceiling obstruction while enhancing overall security.

We stand behind our manufacturing with a 1-year warranty on materials and work quality and offer optional extended warranties for long-term peace of mind.

As a quality-driven manufacturer, Town Gate Co. adheres to the highest industry standards, maintaining strict quality control throughout our process to ensure lasting performance and reliability you can trust.

Installation Overview

Town Gate doors are built for quick and clean installation in standard masonry or framed openings.

Rolling steel doors are engineered to be durable, strong, and cost-effective—both in installation and long-term maintenance.

Please note: Preparation of openings, structural or miscellaneous steel work, access doors, finish or on-site painting Town Gate installation team can do it if need it.

Electrical wiring, conduit, fuses, and disconnect switches, fall under the responsibilities of other contractors or trades involved in the project.

• Manual Push-Up Operation:
  Town Gate Co. offers a reliable manual push-up option designed for storefronts and other commercial settings. Ideal for doors up to 120 square feet (maximum 12′ wide x 12′ high), this operation method provides a simple and durable solution for everyday use, requiring no electricity—perfect for locations where power is limited or not needed.
  
  
• Town Gate Central Motor Operation
  For added convenience, Town Gate offers the Central motor operator as an optional upgrade. Classified and built for 115V, 60 Hz, this system provides smooth, automated performance. Commonly used in storefronts, warehouses, and open-air commercial spaces, the motorized operation can be paired with push-button, key switch, remote control, keypad and internet App for secure and user-friendly access.

Curtain

• Slat Profile: 4″ Solid “W” interlocking slats, 22 ga galvanized steel.
• Options: Punched, perforated and grilled. Factory installed end locks or wind locks.
• Finish: Galvanized or customizable powder-coat colors.

Bottom Bar

• Standard includes a single or double angle galvanized bottom bar

Brackets

• Material: 14 ga stamped steel, cold rolled steel or galvanized
• Shape:  hexagon, round and square
• Finish Options: Galvanized or customizable powder-coat colors.

Guides

• Material: Wall mounting angle 1/8″x2″x2″ carbon steel.
• Shape: 2 1/2 ” Roll form guide.
• Finish Options: Galvanized or customizable powder-coat colors.

Counterbalance Assembly

• Material: Flat blue steel spring, 2″ steel pipe and 8″ spring box with ball bearing.
• Assemble: Wrapped around a 2” pipe shaft and mounted into an 8” spring box.
• Finish Options: Galvanized or customizable powder-coat colors.

Hood / Coil Housing

• Material: 22 ga galvanized steel hood to fully close the coil.
• Shape:  hexagon, round and square
• Finish: Galvanized or customizable powder-coat colors.

Note: Hood not recommended abobe the celling

Locking Devices

Standard: Left and right locking pins for pad lock.

Optional: Slide lock on bottom bar.

Applications

Town Gate manual push-up doors with solid “W” slat are the ideal security solution for a wide range of commercial and service environments where durability, manual operation, and aesthetic appeal are key:
Retail Storefronts, Shopping Mall Units, Pharmacies and Convenience Stores, Coffee Shops and Take-Out Restaurants, Storage Rooms and Service Closets, Reception or Cashier Windows in Medical Clinics or Parking Facilities.

Functional Benefits

Locking Options
Comes standard with Both sides pins locks for padlock use. Optional slide locks can be added for increased security.

Durable Curtain Slats Assembly
Constructed from 22-gauge galvanized steel, our 4” interlocking solid “W” slat with end lock or wind lock, offer excellent resistance to forced entry and wear. Optional punched slats and reinforcement plates are also available.

Manual Lift Operation
No motor needed. Designed for simple, daily manual operation using a push-up method with ergonomic handling as an option this gate can be motorized, Town Gate offer a central motor build exclusive for this type of door.

Custom Finish Options
Choose from our Powder coating colors to match your brand or storefront aesthetic.

High-Quality Hardware
Equipped with 14-gauge steel brackets (15” hex shape), roll-formed 14-gauge side guides, and a galvanized hood for superior durability.

Town Gate Advantage and Benefit

Town Gate manual push up door was Ingenierie design to minimize friction percentage (%) to ensure easy operation and minimize maintenance required.

After 48 years of combined industry experience, our team has delivered high-performance rolling doors across countless retail and commercial installations. Our reputation is founded on consistent work quality, precision, and customer-first service.

Each door is custom manufactured to meet your exact dimensions, layout, and usage needs. The solid “W” slat is design to offer a compact yet highly durable build, reducing ceiling obstruction while enhancing overall security.

We stand behind our manufacturing with a 1-year warranty on materials and work quality and offer optional extended warranties for long-term peace of mind.

As a quality-driven manufacturer, Town Gate Co. adheres to the highest industry standards, maintaining strict quality control throughout our process to ensure lasting performance and reliability you can trust.

Installation Overview

Town Gate doors are built for quick and clean installation in standard masonry or framed openings.

Rolling steel doors are engineered to be durable, strong, and cost-effective—both in installation and long-term maintenance.

Please note: Preparation of openings, structural or miscellaneous steel work, access doors, finish or on-site painting Town Gate installation team can do it if need it.

Electrical wiring, conduit, fuses, and disconnect switches, fall under the responsibilities of other contractors or trades involved in the project.

• Manual Push-Up Operation:
  Town Gate Co. offers a reliable manual push-up option designed for storefronts and other commercial settings. Ideal for doors up to 120 square feet (maximum 12′ wide x 12′ high), this operation method provides a simple and durable solution for everyday use, requiring no electricity—perfect for locations where power is limited or not needed.
  
  
• Town Gate Central Motor Operation
  For added convenience, Town Gate offers the Central motor operator as an optional upgrade. Classified and built for 115V, 60 Hz, this system provides smooth, automated performance. Commonly used in storefronts, warehouses, and open-air commercial spaces, the motorized operation can be paired with push-button, key switch, remote control, keypad and internet App for secure and user-friendly access.

Curtain

• Slat Profile: 3″ Solid Flat interlocking slats, 22 ga galvanized steel.
• Options: Punched, perforated and grilled. Factory installed end locks or wind locks.
• Finish: Galvanized or customizable powder-coat colors.

Bottom Bar

• Standard includes a single or double angle galvanized bottom bar

Brackets

• Material: 14 ga stamped steel, cold rolled steel or galvanized
• Shape:  hexagon, round and square
• Finish Options: Galvanized or customizable powder-coat colors.

Guides

• Material: Wall mounting angle 1/8″x2″x2″ carbon steel.
• Shape: 2 1/2 ” Roll form guide.
• Finish Options: Galvanized or customizable powder-coat colors.

Counterbalance Assembly

• Material: Flat blue steel spring, 2″ steel pipe and 8″ spring box with ball bearing.
• Assemble: Wrapped around a 2” pipe shaft and mounted into an 8” spring box.
• Finish Options: Galvanized or customizable powder-coat colors.

Hood / Coil Housing

• Material: 22 ga galvanized steel hood to fully close the coil.
• Shape:  hexagon, round and square
• Finish: Galvanized or customizable powder-coat colors.

Note: Hood not recommended abobe the celling

Locking Devices

Standard: Left and right locking pins for pad lock.

Optional: Slide lock on bottom bar.

Applications

Town Gate manual push-up doors with solid flat slat are the ideal security solution for a wide range of commercial and service environments where durability, manual operation, and aesthetic appeal are key:
Retail Storefronts, Shopping Mall Units, Pharmacies and Convenience Stores, Coffee Shops and Take-Out Restaurants, Storage Rooms and Service Closets, Reception or Cashier Windows in Medical Clinics or Parking Facilities.

Functional Benefits

Locking Options
Comes standard with Both sides pins locks for padlock use. Optional slide locks can be added for increased security.

Durable Curtain Slats Assembly
Constructed from 22-gauge galvanized steel, our 3” interlocking solid flat slat with end lock or wind lock, offer excellent resistance to forced entry and wear. Optional punched slats and reinforcement plates are also available.

Manual Lift Operation
No motor needed. Designed for simple, daily manual operation using a push-up method with ergonomic handling as an option this gate can be motorized, Town Gate offer a central motor build exclusive for this type of door.

Custom Finish Options
Choose from our Powder coating colors to match your brand or storefront aesthetic.

High-Quality Hardware
Equipped with 14-gauge steel brackets (15” hex shape), roll-formed 14-gauge side guides, and a galvanized hood for superior durability.

Town Gate Advantage and Benefit

Town Gate manual push up door was Ingenierie design to minimize friction percentage (%) to ensure easy operation and minimize maintenance required.

After 48 years of combined industry experience, our team has delivered high-performance rolling doors across countless retail and commercial installations. Our reputation is founded on consistent work quality, precision, and customer-first service.

Each door is custom manufactured to meet your exact dimensions, layout, and usage needs. The solid flat slat is design to offer a compact yet highly durable build, reducing ceiling obstruction while enhancing overall security.

We stand behind our manufacturing with a 1-year warranty on materials and work quality and offer optional extended warranties for long-term peace of mind.

As a quality-driven manufacturer, Town Gate Co. adheres to the highest industry standards, maintaining strict quality control throughout our process to ensure lasting performance and reliability you can trust.

Installation Overview

Town Gate doors are built for quick and clean installation in standard masonry or framed openings.

Rolling steel doors are engineered to be durable, strong, and cost-effective—both in installation and long-term maintenance.

Please note: Preparation of openings, structural or miscellaneous steel work, access doors, finish or on-site painting Town Gate installation team can do it if need it.

Electrical wiring, conduit, fuses, and disconnect switches, fall under the responsibilities of other contractors or trades involved in the project.

• Manual Push-Up Operation:
  Town Gate Co. offers a reliable manual push-up option designed for storefronts and other commercial settings. Ideal for doors up to 120 square feet (maximum 12′ wide x 12′ high), this operation method provides a simple and durable solution for everyday use, requiring no electricity—perfect for locations where power is limited or not needed.
  
  
• Town Gate Central Motor Operation
  For added convenience, Town Gate offers the Central motor operator as an optional upgrade. Classified and built for 115V, 60 Hz, this system provides smooth, automated performance. Commonly used in storefronts, warehouses, and open-air commercial spaces, the motorized operation can be paired with push-button, key switch, remote control, keypad and internet App for secure and user-friendly access.

Curtain

• Slat Profile: 4″ “C” Punched or 3″ flat punched interlocking slats, 22 ga galvanized steel.
• Options: Solid “C” “W” “flat”, Perforated and grilled. Factory installed end locks or wind locks.
• Finish: Galvanized or customizable powder-coat colors.

Bottom Bar

• Standard includes a single or double angle galvanized bottom bar

Brackets

• Material: 14 ga stamped steel, cold rolled steel or galvanized
• Shape:  hexagon, round and square
• Finish Options: Galvanized or customizable powder-coat colors.

Guides

• Material: Wall mounting angle 1/8″x2″x2″ carbon steel.
• Shape: 2 1/2 ” Roll form guide.
• Finish Options: Galvanized or customizable powder-coat colors.

Counterbalance Assembly

• Material: Flat blue steel spring, 2″ steel pipe and 8″ spring box with ball bearing.
• Assemble: Wrapped around a 2” pipe shaft and mounted into an 8” spring box.
• Finish Options: Galvanized or customizable powder-coat colors.

Hood / Coil Housing

• Material: 22 ga galvanized steel hood to fully close the coil.
• Shape:  hexagon, round and square
• Finish: Galvanized or customizable powder-coat colors.

Note: Hood not recommended abobe the celling

Locking Devices

Standard: Left and right locking pins for pad lock.

Optional: Slide lock on bottom bar.

Applications

Town Gate manual push-up doors with punched slat “C” or flat are the ideal solution for security, visibility and air ventilation in a wide range of commercial and service environments where durability, manual operation, and aesthetic appeal are the key:
Retail Storefronts, Shopping Mall Units, Pharmacies and Convenience Stores, Coffee Shops and Take-Out Restaurants, Storage Rooms and Service Closets, Reception or Cashier Windows in Medical Clinics or Parking Facilities.

Functional Benefits

Locking Options
Comes standard with Both sides pins locks for padlock use. Optional slide locks can be added for increased security.

Durable Curtain Slats Assembly
Constructed from 22-gauge galvanized steel, our 4” interlocking “C” punched or 3″ flat punched slat with end lock or wind lock, offer excellent resistance to forced entry and wear. Optional reinforcement plates are also available.

Manual Lift Operation
No motor needed. Designed for simple, daily manual operation using a push-up method with ergonomic handling as an option this gate can be motorized, Town Gate offer a central motor build exclusive for this type of door.

Custom Finish Options
Choose from our Powder coating colors to match your brand or storefront aesthetic.

High-Quality Hardware
Equipped with 14-gauge steel brackets (15” hex shape), roll-formed 14-gauge side guides, and a galvanized hood for superior durability.

Town Gate Advantage and Benefit

Town Gate manual push up door was Ingenierie design to minimize friction percentage (%) to ensure easy operation and minimize maintenance required.

After 48 years of combined industry experience, our team has delivered high-performance rolling doors across countless retail and commercial installations. Our reputation is founded on consistent work quality, precision, and customer-first service.

Each door is custom manufactured to meet your exact dimensions, layout, and usage needs. The punched slat is design to offer a compact yet highly durable build, reducing ceiling obstruction while enhancing overall security.

We stand behind our manufacturing with a 1-year warranty on materials and work quality and offer optional extended warranties for long-term peace of mind.

As a quality-driven manufacturer, Town Gate Co. adheres to the highest industry standards, maintaining strict quality control throughout our process to ensure lasting performance and reliability you can trust.

Installation Overview

Town Gate doors are built for quick and clean installation in standard masonry or framed openings.

Rolling steel doors are engineered to be durable, strong, and cost-effective—both in installation and long-term maintenance.

Please note: Preparation of openings, structural or miscellaneous steel work, access doors, finish or on-site painting Town Gate installation team can do it if need it.

Electrical wiring, conduit, fuses, and disconnect switches, fall under the responsibilities of other contractors or trades involved in the project.

• Manual Push-Up Operation:
  Town Gate Co. offers a reliable manual push-up option designed for storefronts and other commercial settings. Ideal for doors up to 120 square feet (maximum 12′ wide x 12′ high), this operation method provides a simple and durable solution for everyday use, requiring no electricity—perfect for locations where power is limited or not needed.
  
  
• Town Gate Central Motor Operation
  For added convenience, Town Gate offers the Central motor operator as an optional upgrade. Classified and built for 115V, 60 Hz, this system provides smooth, automated performance. Commonly used in storefronts, warehouses, and open-air commercial spaces, the motorized operation can be paired with push-button, key switch, remote control, keypad and internet App for secure and user-friendly access.

Curtain

• Slat Profile: 4″ Perforated curved or 3″ perforated flat interlocking slats, 22 ga galvanized steel.
• Options: Solid “C” “W” “flat”, Punched and grilled. Factory installed end locks or wind locks.
• Finish: Galvanized or customizable powder-coat colors.

Bottom Bar

• Standard includes a single or double angle galvanized bottom bar

Brackets

• Material: 14 ga stamped steel, cold rolled steel or galvanized
• Shape:  hexagon, round and square
• Finish Options: Galvanized or customizable powder-coat colors.

Guides

• Material: Wall mounting angle 1/8″x2″x2″ carbon steel.
• Shape: 2 1/2 ” Roll form guide.
• Finish Options: Galvanized or customizable powder-coat colors.

Counterbalance Assembly

• Material: Flat blue steel spring, 2″ steel pipe and 8″ spring box with ball bearing.
• Assemble: Wrapped around a 2” pipe shaft and mounted into an 8” spring box.
• Finish Options: Galvanized or customizable powder-coat colors.

Hood / Coil Housing

• Material: 22 ga galvanized steel hood to fully close the coil.
• Shape:  hexagon, round and square
• Finish: Galvanized or customizable powder-coat colors.

Note: Hood not recommended abobe the celling

Locking Devices

Standard: Left and right locking pins for pad lock.

Optional: Slide lock on bottom bar.

Applications

Town Gate manual push-up doors with perforated curve or flat slat are the ideal solution for security, visibility and air ventilation in a wide range of commercial and service environments where durability, manual operation, and aesthetic appeal are key:
Retail Storefronts, Shopping Mall Units, Pharmacies and Convenience Stores, Coffee Shops and Take-Out Restaurants, Storage Rooms and Service Closets, Reception or Cashier Windows in Medical Clinics or Parking Facilities.

Functional Benefits

Locking Options
Comes standard with Both sides pins locks for padlock use. Optional slide locks can be added for increased security.

Durable Curtain Slats Assembly
Constructed from 22-gauge galvanized steel, our 4” interlocking perforated curved or 3″ perforated flat slat with end lock or wind lock, offer excellent resistance to forced entry and wear. Optional reinforcement plates are also available.

Manual Lift Operation
No motor needed. Designed for simple, daily manual operation using a push-up method with ergonomic handling as an option this gate can be motorized, Town Gate offer a central motor build exclusive for this type of door.

Custom Finish Options
Choose from our Powder coating colors to match your brand or storefront aesthetic.

High-Quality Hardware
Equipped with 14-gauge steel brackets (15” hex shape), roll-formed 14-gauge side guides, and a galvanized hood for superior durability.

Town Gate Advantage and Benefit

Town Gate manual push up door was Ingenierie design to minimize friction percentage (%) to ensure easy operation and minimize maintenance required.

After 48 years of combined industry experience, our team has delivered high-performance rolling doors across countless retail and commercial installations. Our reputation is founded on consistent work quality, precision, and customer-first service.

Each door is custom manufactured to meet your exact dimensions, layout, and usage needs. The perforated curve or flat slat are design to offer a compact yet highly durable build, reducing ceiling obstruction while enhancing overall security.

We stand behind our manufacturing with a 1-year warranty on materials and work quality and offer optional extended warranties for long-term peace of mind.

As a quality-driven manufacturer, Town Gate Co. adheres to the highest industry standards, maintaining strict quality control throughout our process to ensure lasting performance and reliability you can trust.

Installation Overview

Town Gate doors are built for quick and clean installation in standard masonry or framed openings.

Rolling steel doors are engineered to be durable, strong, and cost-effective—both in installation and long-term maintenance.

Please note: Preparation of openings, structural or miscellaneous steel work, access doors, finish or on-site painting Town Gate installation team can do it if need it.

Electrical wiring, conduit, fuses, and disconnect switches, fall under the responsibilities of other contractors or trades involved in the project.

• Manual Push-Up Operation:
  Town Gate Co. offers a reliable manual push-up option designed for storefronts and other commercial settings. Ideal for doors up to 120 square feet (maximum 12′ wide x 12′ high), this operation method provides a simple and durable solution for everyday use, requiring no electricity—perfect for locations where power is limited or not needed.
  
  
• Town Gate Central Motor Operation
  For added convenience, Town Gate offers the Central motor operator as an optional upgrade. Classified and built for 115V, 60 Hz, this system provides smooth, automated performance. Commonly used in storefronts, warehouses, and open-air commercial spaces, the motorized operation can be paired with push-button, key switch, remote control, keypad and internet App for secure and user-friendly access.

Curtain

• Curtain Profile: 6″ or 9″ Straight or brick pattern Grilled is made with PVC sleave over 5/16 hot dipped galvanized horizontal rods space 2 1/4 ” O C. Aluminum alternated vertical links and continued end link with push nuts to prevent the curtain from leaving the sidetrack
• Options: 6″ or 9″ Aluminum sleave
• Finish: Silver, broce, gold and anodized colors

Bottom Bar

• Standard includes a single or double angle galvanized bottom bar
• 2″ x 3 1/2″extruded aluminum tubular bottom bar.
• Finish: Galvanized or customizable powder-coat colors.

Brackets

• Material: 14 ga stamped steel, cold rolled steel or galvanized
• Shape:  hexagon, round and square
• Finish Options: Galvanized or customizable powder-coat colors.

Guides

• Material: Wall mounting angle 1/8″x2″x2″ carbon steel.
• Shape: 2 1/2 ” Roll form guide.
• Finish Options: Galvanized or customizable powder-coat colors.

Counterbalance Assembly

• Material: Flat blue steel spring, 2″ steel pipe and 8″ spring box with ball bearing.
• Assemble: Wrapped around a 2” pipe shaft and mounted into an 8” spring box.
• Finish Options: Galvanized or customizable powder-coat colors.

Hood / Coil Housing

• Material: 22 ga galvanized steel hood to fully close the coil.
• Shape:  hexagon, round and square
• Finish: Galvanized or customizable powder-coat colors.

Note: Hood not recommended abobe the celling

Locking Devices

Standard: Left and right locking pins for pad lock.

Optional: Slide lock on bottom bar.

Applications

Town Gate manual push-up doors with Grilled curtain are the ideal solution for security, visibility and air ventilation in a wide range of commercial and service environments where durability, manual operation, and aesthetic appeal are key:
Retail Storefronts, Shopping Mall Units, Pharmacies and Convenience Stores, Coffee Shops and Take-Out Restaurants, Storage Rooms and Service Closets, Reception or Cashier Windows in Medical Clinics or Parking Facilities.

Functional Benefits

Locking Options
Comes standard with Both sides pins locks for padlock use. Optional slide locks can be added for increased security.

Durable Curtain Grilled Assembly
Constructed from 6″ or 9″ Straight or brick pattern Grilled is made with PVC sleave over 5/16 hot dipped galvanized horizontal rods space 2 1/4 ” O C. Aluminum alternated vertical links and continued end link, offer excellent resistance to forced entry and wear.

Manual Lift Operation
No motor needed. Designed for simple, daily manual operation using a push-up method with ergonomic handling as an option this gate can be motorized, Town Gate offer a central motor build exclusive for this type of door.

Custom Finish Options
Choose from our Powder coating colors to match your brand or storefront aesthetic.

High-Quality Hardware
Equipped with 14-gauge steel brackets (15” hex shape), roll-formed 14-gauge side guides, and a galvanized hood for superior durability.

Town Gate Advantage and Benefit

Town Gate manual push up door was Ingenierie design to minimize friction percentage (%) to ensure easy operation and minimize maintenance required.

After 48 years of combined industry experience, our team has delivered high-performance rolling doors across countless retail and commercial installations. Our reputation is founded on consistent work quality, precision, and customer-first service.

Each door is custom manufactured to meet your exact dimensions, layout, and usage needs. The Straight or brick pattern Grilled curtains are design to offer a compact yet highly durable build, reducing ceiling obstruction while enhancing overall security.

We stand behind our manufacturing with a 1-year warranty on materials and work quality and offer optional extended warranties for long-term peace of mind.

As a quality-driven manufacturer, Town Gate Co. adheres to the highest industry standards, maintaining strict quality control throughout our process to ensure lasting performance and reliability you can trust.

Installation Overview

Town Gate doors are built for quick and clean installation in standard masonry or framed openings.

Rolling steel doors are engineered to be durable, strong, and cost-effective—both in installation and long-term maintenance.

Please note: Preparation of openings, structural or miscellaneous steel work, access doors, finish or on-site painting Town Gate installation team can do it if need it.

Electrical wiring, conduit, fuses, and disconnect switches, fall under the responsibilities of other contractors or trades involved in the project.

• Manual Push-Up Operation:
  Town Gate Co. offers a reliable manual push-up option designed for storefronts and other commercial settings. Ideal for doors up to 120 square feet (maximum 12′ wide x 12′ high), this operation method provides a simple and durable solution for everyday use, requiring no electricity—perfect for locations where power is limited or not needed.
  
  
• Town Gate Central Motor Operation
  For added convenience, Town Gate offers the Central motor operator as an optional upgrade. Classified and built for 115V, 60 Hz, this system provides smooth, automated performance. Commonly used in storefronts, warehouses, and open-air commercial spaces, the motorized operation can be paired with push-button, key switch, remote control, keypad and internet App for secure and user-friendly access.

Curtain

• Slat Profile: 4″ Solid curved interlocking slats, 22 ga galvanized steel.
• Options: Punched, perforated and grille. Factory installed end locks or wind locks.
• Finish: Galvanized or customizable powder-coat colors.

Bottom Bar

• Standard includes a single or double angle galvanized bottom bar

Brackets

• Material: 3/16″ cold rolled steel or galvanized with ball bearing support
• Shape:  hexagon, round and square
• Finish Options: Galvanized or customizable powder-coat colors.

Guides

• Material: Wall mounting angle 3/16″ x 2″ x2″, cold rolled steel.
• Shape: 14 Ga 1 1/2″ x 2 1/2″ Roll form guide.
• Finish Options: Galvanized or customizable powder-coat colors.

Counterbalance Assembly

Engineered pipe to minimize deflection to 0.03” per-ft of width.
Helical torsion springs with 25% overload factor, grease-packed and mounted on cold-rolled steel shaft.
Tension adjustable externally.
Sealed ball bearings reduce shaft wear.
Cycle life: 20,000 to 400,000.

Hood / Coil Housing

• Material: 22 ga galvanized steel hood to fully close the coil.
• Shape:  hexagon, round and square
• Finish: Galvanized or customizable powder-coat colors.

Note: Hood not recommended abobe the celling

Locking Devices

Standard: Left and right locking pins for pad lock.

Optional: Slide lock on bottom bar.

Applications

Town Gate hand chain doors with solid curve slat are the ideal security solution for a wide range of commercial and service environments where durability, chain operation, and aesthetic appeal are the key Like:
Retail Storefronts, Shopping Mall Units, Pharmacies and Convenience Stores, Coffee Shops and Take-Out Restaurants, Storage Rooms and Service Closets, Reception or Cashier Windows in Medical Clinics or Parking Facilities.

Functional Benefits

Locking Options
Comes standard with Both sides pins locks for padlock use. Optional slide locks can be added for increased security.

Durable Curtain Slats Assembly
Constructed from 22-gauge galvanized steel, our 4” interlocking solid curved slat with end lock or wind lock, offer excellent resistance to forced entry and wear. Optional punched slats and reinforcement plates are also available.

Hand chain Lift Operation
No motor needed. Designed for simple, daily chain lift operation use a chain method with ergonomic handling as an option this gate can be motorized, Town Gate offer a frontal Smart motor, frontal regular motor, tubular motor, gear head motor and belt drive motor build exclusive for this type of door.

Custom Finish Options
Choose from our Powder coating colors to match your brand or storefront aesthetic.

High-Quality Hardware
Equipped with 3 1/16 steel brackets (16” hex shape or round shape), roll-formed 14-gauge side guides, and a galvanized hood for superior durability.

Town Gate Advantage and Benefit

Town Gate hand chain door was Ingenierie design to minimize friction percentage (%) to ensure easy operation and minimize maintenance required.

After 48 years of combined industry experience, our team has delivered high-performance rolling doors across countless retail and commercial installations. Our reputation is founded on consistent work quality, precision, and customer-first service.

Each door is custom manufactured to meet your exact dimensions, layout, and usage needs. The solid curve slat is design to offer a compact yet highly durable build, reducing ceiling obstruction while enhancing overall security.

We stand behind our manufacturing with a 1-year warranty on materials and work quality and offer optional extended warranties for long-term peace of mind.

As a quality-driven manufacturer, Town Gate Co. adheres to the highest industry standards, maintaining strict quality control throughout our process to ensure lasting performance and reliability you can trust.

Installation Overview

Town Gate doors are built for quick and clean installation in standard masonry or framed openings.

Rolling steel doors are engineered to be durable, strong, and cost-effective—both in installation and long-term maintenance.

Please note: Preparation of openings, structural or miscellaneous steel work, access doors, finish or on-site painting Town Gate installation team can do it if need it.

Electrical wiring, conduit, fuses, and disconnect switches, fall under the responsibilities of other contractors or trades involved in the project.

• Hand Chain Operation:
  Town Gate Co. offers a reliable hand chain option designed for storefronts and other commercial settings. Ideal for big roll up doors, this operation method provides a simple and durable solution for everyday use, requiring no electricity—perfect for locations where power is limited or not needed.
  
  
• Town Gate Motor Operation
  For added convenience, Town Gate offers a variety of Motors operator as an optional upgrade. Classified and built for his kind of doors, this system provides smooth, automated performance. Commonly used in storefronts, warehouses, and open-air commercial spaces, the motorized operation can be paired with push-button, key switch, remote control, keypad and internet App for secure and user-friendly access.

Curtain

• Slat Profile: 4″ Solid “W” interlocking slats, 22 ga galvanized steel.
• Options: Punched, perforated and grilled. Factory installed end locks or wind locks.
• Finish: Galvanized or customizable powder-coat colors.

Bottom Bar

• Standard includes a single or double angle galvanized bottom bar

Brackets

• Material: 3/16″ cold rolled steel or galvanized with ball bearing support
• Shape:  hexagon, round and square
• Finish Options: Galvanized or customizable powder-coat colors.

Guides

• Material: Wall mounting angle 3/16″ x 2″ x2″, cold rolled steel.
• Shape: 14 Ga 1 1/2″ x 2 1/2″ Roll form guide.
• Finish Options: Galvanized or customizable powder-coat colors.

Counterbalance Assembly

Engineered pipe to minimize deflection to 0.03” per-ft of width.
Helical torsion springs with 25% overload factor, grease-packed and mounted on cold-rolled steel shaft.
Tension adjustable externally.
Sealed ball bearings reduce shaft wear.
Cycle life: 20,000 to 400,000.

Hood / Coil Housing

• Material: 22 ga galvanized steel hood to fully close the coil.
• Shape:  hexagon, round and square
• Finish: Galvanized or customizable powder-coat colors.

Note: Hood not recommended abobe the celling

Locking Devices

Standard: Left and right locking pins for pad lock.

Optional: Slide lock on bottom bar.

Applications

Town Gate hand chain doors with solid “W” slat are the ideal security solution for a wide range of commercial and service environments where durability, chain operation, and aesthetic appeal are the key Like:
Retail Storefronts, Shopping Mall Units, Pharmacies and Convenience Stores, Coffee Shops and Take-Out Restaurants, Storage Rooms and Service Closets, Reception or Cashier Windows in Medical Clinics or Parking Facilities.

Functional Benefits

Locking Options
Comes standard with Both sides pins locks for padlock use. Optional slide locks can be added for increased security.

Durable Curtain Slats Assembly
Constructed from 22-gauge galvanized steel, our 4” interlocking solid “W” slat with end lock or wind lock, offer excellent resistance to forced entry and wear. Optional punched slats and reinforcement plates are also available.

Hand chain Lift Operation
No motor needed. Designed for simple, daily chain lift operation use a chain method with ergonomic handling as an option this gate can be motorized, Town Gate offer a frontal Smart motor, frontal regular motor, tubular motor, gear head motor and belt drive motor build exclusive for this type of door.

Custom Finish Options
Choose from our Powder coating colors to match your brand or storefront aesthetic.

High-Quality Hardware
Equipped with 3 1/16 steel brackets (16” hex shape or round shape), roll-formed 14-gauge side guides, and a galvanized hood for superior durability.

Town Gate Advantage and Benefit

Town Gate hand chain door was Ingenierie design to minimize friction percentage (%) to ensure easy operation and minimize maintenance required.

After 48 years of combined industry experience, our team has delivered high-performance rolling doors across countless retail and commercial installations. Our reputation is founded on consistent work quality, precision, and customer-first service.

Each door is custom manufactured to meet your exact dimensions, layout, and usage needs. The solid “W” slat is design to offer a compact yet highly durable build, reducing ceiling obstruction while enhancing overall security.

We stand behind our manufacturing with a 1-year warranty on materials and work quality and offer optional extended warranties for long-term peace of mind.

As a quality-driven manufacturer, Town Gate Co. adheres to the highest industry standards, maintaining strict quality control throughout our process to ensure lasting performance and reliability you can trust.

Installation Overview

Town Gate doors are built for quick and clean installation in standard masonry or framed openings.

Rolling steel doors are engineered to be durable, strong, and cost-effective—both in installation and long-term maintenance.

Please note: Preparation of openings, structural or miscellaneous steel work, access doors, finish or on-site painting Town Gate installation team can do it if need it.

Electrical wiring, conduit, fuses, and disconnect switches, fall under the responsibilities of other contractors or trades involved in the project.

• Hand Chain Operation:
  Town Gate Co. offers a reliable hand chain option designed for storefronts and other commercial settings. Ideal for big roll up doors, this operation method provides a simple and durable solution for everyday use, requiring no electricity—perfect for locations where power is limited or not needed.
  
  
• Town Gate Motor Operation
  For added convenience, Town Gate offers a variety of Motors operator as an optional upgrade. Classified and built for his kind of doors, this system provides smooth, automated performance. Commonly used in storefronts, warehouses, and open-air commercial spaces, the motorized operation can be paired with push-button, key switch, remote control, keypad and internet App for secure and user-friendly access.

Curtain

• Slat Profile: 3″ Solid Flat interlocking slats, 22 ga galvanized steel.
• Options: Punched, perforated and grilled. Factory installed end locks or wind locks.
• Finish: Galvanized or customizable powder-coat colors.

Bottom Bar

• Standard includes a single or double angle galvanized bottom bar

Brackets

• Material: 3/16″ cold rolled steel or galvanized with ball bearing support
• Shape:  hexagon, round and square
• Finish Options: Galvanized or customizable powder-coat colors.

Guides

• Material: Wall mounting angle 3/16″ x 2″ x2″, cold rolled steel.
• Shape: 14 Ga 1 1/2″ x 2 1/2″ Roll form guide.
• Finish Options: Galvanized or customizable powder-coat colors.

Counterbalance Assembly

Engineered pipe to minimize deflection to 0.03” per-ft of width.
Helical torsion springs with 25% overload factor, grease-packed and mounted on cold-rolled steel shaft.
Tension adjustable externally.
Sealed ball bearings reduce shaft wear.
Cycle life: 20,000 to 400,000.

Hood / Coil Housing

• Material: 22 ga galvanized steel hood to fully close the coil.
• Shape:  hexagon, round and square
• Finish: Galvanized or customizable powder-coat colors.

Note: Hood not recommended abobe the celling

Locking Devices

Standard: Left and right locking pins for pad lock.

Optional: Slide lock on bottom bar.

Applications

Town Gate hand chain doors with solid flat slat are the ideal security solution for a wide range of commercial and service environments where durability, chain operation, and aesthetic appeal are key:
Retail Storefronts, Shopping Mall Units, Pharmacies and Convenience Stores, Coffee Shops and Take-Out Restaurants, Storage Rooms and Service Closets, Reception or Cashier Windows in Medical Clinics or Parking Facilities.

Functional Benefits

Locking Options
Comes standard with Both sides pins locks for padlock use. Optional slide locks can be added for increased security.

Durable Curtain Slats Assembly
Constructed from 22-gauge galvanized steel, our 3” interlocking solid flat slat with end lock or wind lock, offer excellent resistance to forced entry and wear. Optional punched slats and reinforcement plates are also available.

Hand chain Lift Operation
No motor needed. Designed for simple, daily chain lift operation use a chain method with ergonomic handling as an option this gate can be motorized, Town Gate offer a frontal Smart motor, frontal regular motor, tubular motor, gear head motor and belt drive motor build exclusive for this type of door.

Custom Finish Options
Choose from our Powder coating colors to match your brand or storefront aesthetic.

High-Quality Hardware
Equipped with 3 1/16 steel brackets (16” hex shape or round shape), roll-formed 14-gauge side guides, and a galvanized hood for superior durability.

Town Gate Advantage and Benefit

Town Gate hand chain door was Ingenierie design to minimize friction percentage (%) to ensure easy operation and minimize maintenance required.

After 48 years of combined industry experience, our team has delivered high-performance rolling doors across countless retail and commercial installations. Our reputation is founded on consistent work quality, precision, and customer-first service.

Each door is custom manufactured to meet your exact dimensions, layout, and usage needs. The solid flat slat is design to offer a compact yet highly durable build, reducing ceiling obstruction while enhancing overall security.

We stand behind our manufacturing with a 1-year warranty on materials and work quality and offer optional extended warranties for long-term peace of mind.

As a quality-driven manufacturer, Town Gate Co. adheres to the highest industry standards, maintaining strict quality control throughout our process to ensure lasting performance and reliability you can trust.

Installation Overview

Town Gate doors are built for quick and clean installation in standard masonry or framed openings.

Rolling steel doors are engineered to be durable, strong, and cost-effective—both in installation and long-term maintenance.

Please note: Preparation of openings, structural or miscellaneous steel work, access doors, finish or on-site painting Town Gate installation team can do it if need it.

Electrical wiring, conduit, fuses, and disconnect switches, fall under the responsibilities of other contractors or trades involved in the project.

• Hand Chain Operation:
  Town Gate Co. offers a reliable hand chain option designed for storefronts and other commercial settings. Ideal for big roll up doors, this operation method provides a simple and durable solution for everyday use, requiring no electricity—perfect for locations where power is limited or not needed.
  
  
• Town Gate Motor Operation
  For added convenience, Town Gate offers a variety of Motors operator as an optional upgrade. Classified and built for his kind of doors, this system provides smooth, automated performance. Commonly used in storefronts, warehouses, and open-air commercial spaces, the motorized operation can be paired with push-button, key switch, remote control, keypad and internet App for secure and user-friendly access.

Curtain

• Slat Profile: 4″ “C” Punched or 3″ flat punched interlocking slats, 22 ga galvanized steel.
• Options: Solid “C” “W” “flat”, Perforated and grilled. Factory installed end locks or wind locks.
• Finish: Galvanized or customizable powder-coat colors.

Bottom Bar

• Standard includes a single or double angle galvanized bottom bar

Brackets

• Material: 3/16″ cold rolled steel or galvanized with ball bearing support
• Shape:  hexagon, round and square
• Finish Options: Galvanized or customizable powder-coat colors.

Guides

• Material: Wall mounting angle 3/16″ x 2″ x2″, cold rolled steel.
• Shape: 14 Ga 1 1/2″ x 2 1/2″ Roll form guide.
• Finish Options: Galvanized or customizable powder-coat colors.

Counterbalance Assembly

Engineered pipe to minimize deflection to 0.03” per-ft of width.
Helical torsion springs with 25% overload factor, grease-packed and mounted on cold-rolled steel shaft.
Tension adjustable externally.
Sealed ball bearings reduce shaft wear.
Cycle life: 20,000 to 400,000.

Hood / Coil Housing

• Material: 22 ga galvanized steel hood to fully close the coil.
• Shape:  hexagon, round and square
• Finish: Galvanized or customizable powder-coat colors.

Note: Hood not recommended abobe the celling

Locking Devices

Standard: Left and right locking pins for pad lock.

Optional: Slide lock on bottom bar.

Applications

Town Gate hand chain doors with punched slat “C” or flat are the ideal solution for security, visibility and air ventilation in a wide range of commercial and service environments where durability, chain operation, and aesthetic appeal are the key:
Retail Storefronts, Shopping Mall Units, Pharmacies and Convenience Stores, Coffee Shops and Take-Out Restaurants, Storage Rooms and Service Closets, Reception or Cashier Windows in Medical Clinics or Parking Facilities.

Functional Benefits

Locking Options
Comes standard with Both sides pins locks for padlock use. Optional slide locks can be added for increased security.

Durable Curtain Slats Assembly
Constructed from 22-gauge galvanized steel, our 4” interlocking “C” punched or 3″ flat punched slat with end lock or wind lock, offer excellent resistance to forced entry and wear. Optional reinforcement plates are also available.

Hand chain Lift Operation
No motor needed. Designed for simple, daily chain lift operation use a chain method with ergonomic handling as an option this gate can be motorized, Town Gate offer a frontal Smart motor, frontal regular motor, tubular motor, gear head motor and belt drive motor build exclusive for this type of door.

Custom Finish Options
Choose from our Powder coating colors to match your brand or storefront aesthetic.

High-Quality Hardware
Equipped with 3 1/16 steel brackets (16” hex shape or round shape), roll-formed 14-gauge side guides, and a galvanized hood for superior durability.

Town Gate Advantage and Benefit

Town Gate hand chain door was Ingenierie design to minimize friction percentage (%) to ensure easy operation and minimize maintenance required.

After 48 years of combined industry experience, our team has delivered high-performance rolling doors across countless retail and commercial installations. Our reputation is founded on consistent work quality, precision, and customer-first service.

Each door is custom manufactured to meet your exact dimensions, layout, and usage needs. The punched slat is design to offer a compact yet highly durable build, visibility and air flow, reducing ceiling obstruction while enhancing overall security.

We stand behind our manufacturing with a 1-year warranty on materials and work quality and offer optional extended warranties for long-term peace of mind.

As a quality-driven manufacturer, Town Gate Co. adheres to the highest industry standards, maintaining strict quality control throughout our process to ensure lasting performance and reliability you can trust.

Installation Overview

Town Gate doors are built for quick and clean installation in standard masonry or framed openings.

Rolling steel doors are engineered to be durable, strong, and cost-effective—both in installation and long-term maintenance.

Please note: Preparation of openings, structural or miscellaneous steel work, access doors, finish or on-site painting Town Gate installation team can do it if need it.

Electrical wiring, conduit, fuses, and disconnect switches, fall under the responsibilities of other contractors or trades involved in the project.

• Hand Chain Operation:
  Town Gate Co. offers a reliable hand chain option designed for storefronts and other commercial settings. Ideal for big roll up doors, this operation method provides a simple and durable solution for everyday use, requiring no electricity—perfect for locations where power is limited or not needed.
  
  
• Town Gate Motor Operation
  For added convenience, Town Gate offers a variety of Motors operator as an optional upgrade. Classified and built for his kind of doors, this system provides smooth, automated performance. Commonly used in storefronts, warehouses, and open-air commercial spaces, the motorized operation can be paired with push-button, key switch, remote control, keypad and internet App for secure and user-friendly access.

Curtain

• Slat Profile: 4″ Perforated curved or 3″ perforated flat interlocking slats, 22 ga galvanized steel.
• Options: Solid “C” “W” “flat”, Punched and grilled. Factory installed end locks or wind locks.
• Finish: Galvanized or customizable powder-coat colors.

Bottom Bar

• Standard includes a single or double angle galvanized bottom bar

Brackets

• Material: 3/16″ cold rolled steel or galvanized with ball bearing support
• Shape:  hexagon, round and square
• Finish Options: Galvanized or customizable powder-coat colors.

Guides

• Material: Wall mounting angle 3/16″ x 2″ x2″, cold rolled steel.
• Shape: 14 Ga 1 1/2″ x 2 1/2″ Roll form guide.
• Finish Options: Galvanized or customizable powder-coat colors.

Counterbalance Assembly

Engineered pipe to minimize deflection to 0.03” per-ft of width.
Helical torsion springs with 25% overload factor, grease-packed and mounted on cold-rolled steel shaft.
Tension adjustable externally.
Sealed ball bearings reduce shaft wear.
Cycle life: 20,000 to 400,000.

Hood / Coil Housing

• Material: 22 ga galvanized steel hood to fully close the coil.
• Shape:  hexagon, round and square
• Finish: Galvanized or customizable powder-coat colors.

Note: Hood not recommended abobe the celling

Locking Devices

Standard: Left and right locking pins for pad lock.

Optional: Slide lock on bottom bar.

Applications

Town Gate hand chain doors with perforated curve or flat slat are the ideal solution for security, visibility and air ventilation in a wide range of commercial and service environments where durability, chain operation, and aesthetic appeal are key:
Retail Storefronts, Shopping Mall Units, Pharmacies and Convenience Stores, Coffee Shops and Take-Out Restaurants, Storage Rooms and Service Closets, Reception or Cashier Windows in Medical Clinics or Parking Facilities.

Functional Benefits

Locking Options
Comes standard with Both sides pins locks for padlock use. Optional slide locks can be added for increased security.

Durable Curtain Slats Assembly
Constructed from 22-gauge galvanized steel, our 4” interlocking perforated curved or 3″ perforated flat slat with end lock or wind lock, offer excellent resistance to forced entry and wear. Optional reinforcement plates are also available.

Hand chain Lift Operation
No motor needed. Designed for simple, daily chain lift operation use a chain method with ergonomic handling as an option this gate can be motorized, Town Gate offer a frontal Smart motor, frontal regular motor, tubular motor, gear head motor and belt drive motor build exclusive for this type of door.

Custom Finish Options
Choose from our Powder coating colors to match your brand or storefront aesthetic.

High-Quality Hardware
Equipped with 3 1/16 steel brackets (16” hex shape or round shape), roll-formed 14-gauge side guides, and a galvanized hood for superior durability.

Town Gate Advantage and Benefit

Town Gate hand chain door was Ingenierie design to minimize friction percentage (%) to ensure easy operation and minimize maintenance required.

After 48 years of combined industry experience, our team has delivered high-performance rolling doors across countless retail and commercial installations. Our reputation is founded on consistent work quality, precision, and customer-first service.

Each door is custom manufactured to meet your exact dimensions, layout, and usage needs. The perforated curve or flat slat are design to offer a compact yet highly durable build, visibility and air flow, reducing ceiling obstruction while enhancing overall security.

We stand behind our manufacturing with a 1-year warranty on materials and work quality and offer optional extended warranties for long-term peace of mind.

As a quality-driven manufacturer, Town Gate Co. adheres to the highest industry standards, maintaining strict quality control throughout our process to ensure lasting performance and reliability you can trust.

Installation Overview

Town Gate doors are built for quick and clean installation in standard masonry or framed openings.

Rolling steel doors are engineered to be durable, strong, and cost-effective—both in installation and long-term maintenance.

Please note: Preparation of openings, structural or miscellaneous steel work, access doors, finish or on-site painting Town Gate installation team can do it if need it.

Electrical wiring, conduit, fuses, and disconnect switches, fall under the responsibilities of other contractors or trades involved in the project.

• Hand Chain Operation:
  Town Gate Co. offers a reliable hand chain option designed for storefronts and other commercial settings. Ideal for big roll up doors, this operation method provides a simple and durable solution for everyday use, requiring no electricity—perfect for locations where power is limited or not needed.
  
  
• Town Gate Motor Operation
  For added convenience, Town Gate offers a variety of Motors operator as an optional upgrade. Classified and built for his kind of doors, this system provides smooth, automated performance. Commonly used in storefronts, warehouses, and open-air commercial spaces, the motorized operation can be paired with push-button, key switch, remote control, keypad and internet App for secure and user-friendly access.

Curtain

• Curtain Profile: 6″ or 9″ Straight or brick pattern Grilled is made with PVC sleave over 5/16 hot dipped galvanized horizontal rods space 2 1/4 ” O C. Aluminum alternated vertical links and continued end link with push nuts to prevent the curtain from leaving the sidetrack
• Options: 6″ or 9″ Aluminum sleave
• Finish: Silver, broce, gold and anodized colors

Bottom Bar

• Standard includes a single or double angle galvanized bottom bar
• 2″ x 3 1/2″extruded aluminum tubular bottom bar.
• Finish: Galvanized or customizable powder-coat colors.

Brackets

• Material: 3/16″ cold rolled steel or galvanized with ball bearing support
• Shape:  hexagon, round and square
• Finish Options: Galvanized or customizable powder-coat colors.

Guides

• Material: Wall mounting angle 3/16″ x 2″ x2″, cold rolled steel.
• Shape: 14 Ga 1 1/2″ x 2 1/2″ Roll form guide.
• Finish Options: Galvanized or customizable powder-coat colors.

Counterbalance Assembly

Engineered pipe to minimize deflection to 0.03” per-ft of width.
Helical torsion springs with 25% overload factor, grease-packed and mounted on cold-rolled steel shaft.
Tension adjustable externally.
Sealed ball bearings reduce shaft wear.
Cycle life: 20,000 to 400,000.

Hood / Coil Housing

• Material: 22 ga galvanized steel hood to fully close the coil.
• Shape:  hexagon, round and square
• Finish: Galvanized or customizable powder-coat colors.

Note: Hood not recommended abobe the celling

Locking Devices

Standard: Left and right locking pins for pad lock.

Optional: Slide lock on bottom bar.

Applications

Town Gate hand chain doors with Grilled curtain are the ideal solution for security, visibility and air ventilation in a wide range of commercial and service environments where durability, chain operation, and aesthetic appeal are key:
Retail Storefronts, Shopping Mall Units, Pharmacies and Convenience Stores, Coffee Shops and Take-Out Restaurants, Storage Rooms and Service Closets, Reception or Cashier Windows in Medical Clinics or Parking Facilities.

Functional Benefits

Locking Options
Comes standard with Both sides pins locks for padlock use. Optional slide locks can be added for increased security.

Durable Curtain Grilled Assembly
Constructed from 6″ or 9″ Straight or brick pattern Grilled is made with PVC sleave over 5/16 hot dipped galvanized horizontal rods space 2 1/4 ” O C. Aluminum alternated vertical links and continued end link, offer excellent resistance to forced entry and wear.

Hand chain Lift Operation
No motor needed. Designed for simple, daily chain lift operation use a chain method with ergonomic handling as an option this gate can be motorized, Town Gate offer a frontal Smart motor, frontal regular motor, tubular motor, gear head motor and belt drive motor build exclusive for this type of door.

Custom Finish Options
Choose from our Powder coating colors to match your brand or storefront aesthetic.

High-Quality Hardware
Equipped with 3 /16 steel brackets (16” hex shape or round shape), roll-formed 14-gauge side guides, and a galvanized hood for superior durability.

Town Gate Advantage and Benefit

Town Gate hand chain door was Ingenierie design to minimize friction percentage (%) to ensure easy operation and minimize maintenance required.

After 48 years of combined industry experience, our team has delivered high-performance rolling doors across countless retail and commercial installations. Our reputation is founded on consistent work quality, precision, and customer-first service.

Each door is custom manufactured to meet your exact dimensions, layout, and usage needs. The Straight or brick pattern Grilled curtains are design to offer a compact yet highly durable build, visibility and air flow, reducing ceiling obstruction while enhancing overall security.

We stand behind our manufacturing with a 1-year warranty on materials and work quality and offer optional extended warranties for long-term peace of mind.

As a quality-driven manufacturer, Town Gate Co. adheres to the highest industry standards, maintaining strict quality control throughout our process to ensure lasting performance and reliability you can trust.

Installation Overview

Town Gate doors are built for quick and clean installation in standard masonry or framed openings.

Rolling steel doors are engineered to be durable, strong, and cost-effective—both in installation and long-term maintenance.

Please note: Preparation of openings, structural or miscellaneous steel work, access doors, finish or on-site painting Town Gate installation team can do it if need it.

Electrical wiring, conduit, fuses, and disconnect switches, fall under the responsibilities of other contractors or trades involved in the project.

• Hand Chain Operation:
  Town Gate Co. offers a reliable hand chain option designed for storefronts and other commercial settings. Ideal for big roll up doors, this operation method provides a simple and durable solution for everyday use, requiring no electricity—perfect for locations where power is limited or not needed.
  
  
• Town Gate Motor Operation
  For added convenience, Town Gate offers a variety of Motors operator as an optional upgrade. Classified and built for his kind of doors, this system provides smooth, automated performance. Commonly used in storefronts, warehouses, and open-air commercial spaces, the motorized operation can be paired with push-button, key switch, remote control, keypad and internet App for secure and user-friendly access.

Curtain

• Slat Profile: 4″ Solid curved interlocking slats, 22 ga galvanized steel.
• Options: Punched, perforated and grille. Factory installed end locks or wind locks.
• Finish: Galvanized or customizable powder-coat colors.

Bottom Bar

• Standard includes a single or double angle galvanized bottom bar

Brackets

• Material: 3/16″ cold rolled steel or galvanized with ball bearing support
• Shape:  hexagon, round and square
• Finish Options: Galvanized or customizable powder-coat colors.

Guides

• Material: Wall mounting angle 3/16″ x 2″ x 2″, 14 ga cold rolled steel.
• Shape: 14 Ga 1 1/2″ x 2 1/2″ Roll form guide.
• Finish Options: Galvanized or customizable powder-coat colors.

Counterbalance Assembly

Engineered pipe to minimize deflection to 0.03” per-ft of width.
Helical torsion springs with 25% overload factor, grease-packed and mounted on cold-rolled steel shaft.
Tension adjustable externally.
Sealed ball bearings reduce shaft wear.
Cycle life: 20,000 to 400,000.

Hood / Coil Housing

• Material: 22 ga galvanized steel hood to fully close the coil.
• Shape:  hexagon, round and square
• Finish: Galvanized, stainless steel or customizable powder-coat colors.

Note: Hood not recommended abobe the celling

Locking Devices

Standard: Left and right locking pins for pad lock.
The motor provides its own locking system

Optional: Slide lock on bottom bar.

Applications

Town Gate motor operator doors with solid curve slat are the ideal security solution for a wide range of commercial and service environments where durability, motor operation, and aesthetic appeal are the key Like:
Retail Storefronts, Shopping Mall Units, Pharmacies and Convenience Stores, Coffee Shops and Take-Out Restaurants, Storage Rooms and Service Closets, Reception or Cashier Windows in Medical Clinics or Parking Facilities.

Functional Benefits

Locking Options
Comes standard with Both sides pins locks for padlock use. Optional slide locks can be added for increased security.

Durable Curtain Slats Assembly
Constructed from 22-gauge galvanized steel, our 4” interlocking solid curved slat with end lock or wind lock, offer excellent resistance to forced entry and wear. Optional punched slats and reinforcement plates are also available.

Motor Lift Operation
Town Gate offer a frontal Smart motor, frontal motor, tubular motor, gear head motor and belt drive motor build exclusive for this type of door.

Custom Finish Options
Choose from our Powder coating colors to match your brand or storefront aesthetic.

High-Quality Hardware
Equipped with 3/16 steel brackets (16” hex shape or round shape), roll-formed 14-gauge side guides, and a galvanized hood for superior durability.

Town Gate Advantage and Benefit

Town Gate motor operator door was Ingenierie design to minimize friction percentage (%) to ensure easy operation and minimize maintenance required.

After 48 years of combined industry experience, our team has delivered high-performance rolling doors across countless retail and commercial installations. Our reputation is founded on consistent work quality, precision, and customer-first service.

Each door is custom manufactured to meet your exact dimensions, layout, and usage needs. The solid curve slat is design to offer a compact yet highly durable build, reducing ceiling obstruction while enhancing overall security.

We stand behind our manufacturing with a 1-year warranty on materials and work quality and offer optional extended warranties for long-term peace of mind.

As a quality-driven manufacturer, Town Gate Co. adheres to the highest industry standards, maintaining strict quality control throughout our process to ensure lasting performance and reliability you can trust.

Installation Overview

Town Gate doors are built for quick and clean installation in standard masonry or framed openings.

Rolling steel doors are engineered to be durable, strong, and cost-effective—both in installation and long-term maintenance.

Please note: Preparation of openings, structural or miscellaneous steel work, access doors, finish or on-site painting Town Gate installation team can do it if need it.

Electrical wiring, conduit, fuses, and disconnect switches, fall under the responsibilities of other contractors or trades involved in the project.

• TG Frontal Motor
  
  Engineered for performance and reliability, our Smart Motor features 100% copper windings, ensuring enhanced durability and power. Equipped with overheat protection, it automatically shuts off at 110°C and resets at 70°C. The built-in mechanical limit switch allows precise positioning for both open and close cycles. Operable via 3 station button (Up/Stop/Down), key switch.
  It also includes manual chain operation and clutch release for power outages. Its noise-reduction planetary gear system.
  (Lifting cap. wit out spring 650, 850 and 1050lb.)
  
  
• TG Smart Motor
  Engineered for performance and reliability, our Smart Motor features 100% copper windings, ensuring enhanced durability and power. Equipped with overheat protection, it automatically shuts off at 110°C and resets at 70°C. The built-in mechanical limit switch allows precise positioning for both open and close cycles. Operable via remote control, 3 station button (Up/Stop/Down), key switch, keypad, wireless app, it also includes manual chain operation and clutch release for power outages. Its noise-reduction planetary gear system.
  (Lifting cap. wit out spring 650, 850 and 1050lb.)
  
  
• TG tubular motor
  The Tubular Motor is a compact operator designed for rolling doors and counter shutters. It features a built-in hand crank overdrive and offers a limit switch capacity for up to 40 revolutions. This motor is ideal for applications where space is limited, and manual chain hoist is not required.
  
  
• Lift Master Gear Head Motor
  Our Gear Head Motor is an industrial-duty, gear-reduced jackshaft operator with high starting torque. It offers full overload protection and is removable without affecting limit switch settings. The motor includes a low voltage control circuit (24 VAC) and is factory pre-wired with all electrical components in a NEMA 1 enclosure.
  
  
• V Belt Lift Master
  Designed for roll up doors, our V-Belt Hoist Operator features a hand chain for manual use, a maintenance alert system, and a max run timer to prevent over cycling. Available in models up to 1 HP for reliable daily operation.

Curtain

• Slat Profile: 4″ Solid “W” interlocking slats, 22 ga galvanized steel.
• Options: Punched, perforated and grilled. Factory installed end locks or wind locks.
• Finish: Galvanized or customizable powder-coat colors.

Bottom Bar

• Standard includes a single or double angle galvanized bottom bar

Brackets

• Material: 3/16″ cold rolled steel or galvanized with ball bearing support
• Shape:  hexagon, round and square
• Finish Options: Galvanized or customizable powder-coat colors.

Guides

• Material: Wall mounting angle 3/16″ x 2″ x2″, 14 ga cold rolled steel.
• Shape: 14 Ga 1 1/2″ x 2 1/2″ Roll form guide.
• Finish Options: Galvanized or customizable powder-coat colors.

Counterbalance Assembly

Engineered pipe to minimize deflection to 0.03” per-ft of width.
Helical torsion springs with 25% overload factor, grease-packed and mounted on cold-rolled steel shaft.
Tension adjustable externally.
Sealed ball bearings reduce shaft wear.
Cycle life: 20,000 to 400,000.

Hood / Coil Housing

• Material: 22 ga galvanized steel hood to fully close the coil.
• Shape:  hexagon, round and square
• Finish: Galvanized, stainless steel or customizable powder-coat colors.

Note: Hood not recommended abobe the celling

Locking Devices

Standard: Left and right locking pins for pad lock.

Optional: Slide lock on bottom bar.

Applications

Town Gate motor operator doors with solid “curve”W” slat are the ideal security solution for a wide range of commercial and service environments where durability, motor operation, and aesthetic appeal are the key Like:
Retail Storefronts, Shopping Mall Units, Pharmacies and Convenience Stores, Coffee Shops and Take-Out Restaurants, Storage Rooms and Service Closets, Reception or Cashier Windows in Medical Clinics or Parking Facilities.

Functional Benefits

Locking Options
Comes standard with Both sides pins locks for padlock use. Optional slide locks can be added for increased security.

Durable Curtain Slats Assembly
Constructed from 22-gauge galvanized steel, our 4” interlocking solid “curved “W” slat with end lock or wind lock, offer excellent resistance to forced entry and wear. Optional punched slats and reinforcement plates are also available.

Motor Lift Operation
Town Gate offer a frontal Smart motor, frontal motor, tubular motor, gear head motor and belt drive motor build exclusive for this type of door.

Custom Finish Options
Choose from our Powder coating colors to match your brand or storefront aesthetic.

High-Quality Hardware
Equipped with 3/16 steel brackets (16” hex shape or round shape), roll-formed 14-gauge side guides, and a galvanized hood for superior durability.

Town Gate Advantage and Benefit

Town Gate motor operator door was Ingenierie design to minimize friction percentage (%) to ensure easy operation and minimize maintenance required.

After 48 years of combined industry experience, our team has delivered high-performance rolling doors across countless retail and commercial installations. Our reputation is founded on consistent work quality, precision, and customer-first service.

Each door is custom manufactured to meet your exact dimensions, layout, and usage needs. The solid curve slat is design to offer a compact yet highly durable build, reducing ceiling obstruction while enhancing overall security.

We stand behind our manufacturing with a 1-year warranty on materials and work quality and offer optional extended warranties for long-term peace of mind.

As a quality-driven manufacturer, Town Gate Co. adheres to the highest industry standards, maintaining strict quality control throughout our process to ensure lasting performance and reliability you can trust.

Installation Overview

Town Gate doors are built for quick and clean installation in standard masonry or framed openings.

Rolling steel doors are engineered to be durable, strong, and cost-effective—both in installation and long-term maintenance.

Please note: Preparation of openings, structural or miscellaneous steel work, access doors, finish or on-site painting Town Gate installation team can do it if need it.

Electrical wiring, conduit, fuses, and disconnect switches, fall under the responsibilities of other contractors or trades involved in the project.

• TG Frontal Motor
  
  Engineered for performance and reliability, our Smart Motor features 100% copper windings, ensuring enhanced durability and power. Equipped with overheat protection, it automatically shuts off at 110°C and resets at 70°C. The built-in mechanical limit switch allows precise positioning for both open and close cycles. Operable via 3 station button (Up/Stop/Down), key switch.
  It also includes manual chain operation and clutch release for power outages. Its noise-reduction planetary gear system.
  (Lifting cap. wit out spring 650, 850 and 1050lb.)
  
• TG Smart Motor
  Engineered for performance and reliability, our Smart Motor features 100% copper windings, ensuring enhanced durability and power. Equipped with overheat protection, it automatically shuts off at 110°C and resets at 70°C. The built-in mechanical limit switch allows precise positioning for both open and close cycles. Operable via remote control, 3 station button (Up/Stop/Down), key switch, keypad, wireless app, it also includes manual chain operation and clutch release for power outages. Its noise-reduction planetary gear system.
  (Lifting cap. wit out spring 650, 850 and 1050lb.)
  
• TG tubular motor
  The Tubular Motor is a compact operator designed for rolling doors and counter shutters. It features a built-in hand crank overdrive and offers a limit switch capacity for up to 40 revolutions. This motor is ideal for applications where space is limited, and manual chain hoist is not required.
  
• Lift Master Gear Head Motor
  Our Gear Head Motor is an industrial-duty, gear-reduced jackshaft operator with high starting torque. It offers full overload protection and is removable without affecting limit switch settings. The motor includes a low voltage control circuit (24 VAC) and is factory pre-wired with all electrical components in a NEMA 1 enclosure.
  
• V Belt Lift Master
  Designed for roll up doors, our V-Belt Hoist Operator features a hand chain for manual use, a maintenance alert system, and a max run timer to prevent over cycling. Available in models up to 1 HP for reliable daily operation.

Curtain

• Slat Profile: 4″ Solid flat interlocking slats, 22 ga galvanized steel.
• Options: Punched, perforated and grilled. Factory installed end locks or wind locks.
• Finish: Galvanized or customizable powder-coat colors.

Bottom Bar

• Standard includes a single or double angle galvanized bottom bar

Brackets

• Material: 3/16″ cold rolled steel or galvanized with ball bearing support
• Shape:  hexagon, round and square
• Finish Options: Galvanized or customizable powder-coat colors.

Guides

• Material: Wall mounting angle 3 1/16″ x 2″ x2″, 14 ga cold rolled steel.
• Shape: 14 Ga 1 1/2″ x 2 1/2″ Roll form guide.
• Finish Options: Galvanized or customizable powder-coat colors.

Counterbalance Assembly

Engineered pipe to minimize deflection to 0.03” per-ft of width.
Helical torsion springs with 25% overload factor, grease-packed and mounted on cold-rolled steel shaft.
Tension adjustable externally.
Sealed ball bearings reduce shaft wear.
Cycle life: 20,000 to 400,000.

Hood / Coil Housing

• Material: 22 ga galvanized steel hood to fully close the coil.
• Shape:  hexagon, round and square
• Finish: Galvanized or customizable powder-coat colors.

Note: Hood not recommended abobe the celling

Locking Devices

Standard: Left and right locking pins for pad lock.

Optional: Slide lock on bottom bar.

Applications

Town Gate motor operator doors with solid “curve”W” slat are the ideal security solution for a wide range of commercial and service environments where durability, motor operation, and aesthetic appeal are the key Like:
Retail Storefronts, Shopping Mall Units, Pharmacies and Convenience Stores, Coffee Shops and Take-Out Restaurants, Storage Rooms and Service Closets, Reception or Cashier Windows in Medical Clinics or Parking Facilities.

Functional Benefits

Locking Options
Comes standard with Both sides pins locks for padlock use. Optional slide locks can be added for increased security.

Durable Curtain Slats Assembly
Constructed from 22-gauge galvanized steel, our 4” interlocking solid “curved “W” slat with end lock or wind lock, offer excellent resistance to forced entry and wear. Optional punched slats and reinforcement plates are also available.

Motor Lift Operation
Town Gate offer a frontal Smart motor, frontal motor, tubular motor, gear head motor and belt drive motor build exclusive for this type of door.

Custom Finish Options
Choose from our Powder coating colors to match your brand or storefront aesthetic.

High-Quality Hardware
Equipped with 3/16 steel brackets (16” hex shape or round shape), roll-formed 14-gauge side guides, and a galvanized hood for superior durability.

Town Gate Advantage and Benefit

Town Gate motor operator door was Ingenierie design to minimize friction percentage (%) to ensure easy operation and minimize maintenance required.

After 48 years of combined industry experience, our team has delivered high-performance rolling doors across countless retail and commercial installations. Our reputation is founded on consistent work quality, precision, and customer-first service.

Each door is custom manufactured to meet your exact dimensions, layout, and usage needs. The solid curve slat is design to offer a compact yet highly durable build, reducing ceiling obstruction while enhancing overall security.

We stand behind our manufacturing with a 1-year warranty on materials and work quality and offer optional extended warranties for long-term peace of mind.

As a quality-driven manufacturer, Town Gate Co. adheres to the highest industry standards, maintaining strict quality control throughout our process to ensure lasting performance and reliability you can trust.

Installation Overview

Town Gate doors are built for quick and clean installation in standard masonry or framed openings.

Rolling steel doors are engineered to be durable, strong, and cost-effective—both in installation and long-term maintenance.

Please note: Preparation of openings, structural or miscellaneous steel work, access doors, finish or on-site painting Town Gate installation team can do it if need it.

Electrical wiring, conduit, fuses, and disconnect switches, fall under the responsibilities of other contractors or trades involved in the project.

• TG Frontal Motor
  
  Engineered for performance and reliability, our Smart Motor features 100% copper windings, ensuring enhanced durability and power. Equipped with overheat protection, it automatically shuts off at 110°C and resets at 70°C. The built-in mechanical limit switch allows precise positioning for both open and close cycles. Operable via 3 station button (Up/Stop/Down), key switch.
  It also includes manual chain operation and clutch release for power outages. Its noise-reduction planetary gear system.
  (Lifting cap. wit out spring 650, 850 and 1050lb.)
  
• TG Smart Motor
  Engineered for performance and reliability, our Smart Motor features 100% copper windings, ensuring enhanced durability and power. Equipped with overheat protection, it automatically shuts off at 110°C and resets at 70°C. The built-in mechanical limit switch allows precise positioning for both open and close cycles. Operable via remote control, 3 station button (Up/Stop/Down), key switch, keypad, wireless app, it also includes manual chain operation and clutch release for power outages. Its noise-reduction planetary gear system.
  (Lifting cap. wit out spring 650, 850 and 1050lb.)
  
• TG tubular motor
  The Tubular Motor is a compact operator designed for rolling doors and counter shutters. It features a built-in hand crank overdrive and offers a limit switch capacity for up to 40 revolutions. This motor is ideal for applications where space is limited, and manual chain hoist is not required.
  
• Lift Master Gear Head Motor
  Our Gear Head Motor is an industrial-duty, gear-reduced jackshaft operator with high starting torque. It offers full overload protection and is removable without affecting limit switch settings. The motor includes a low voltage control circuit (24 VAC) and is factory pre-wired with all electrical components in a NEMA 1 enclosure.
  
• V Belt Lift Master
  Designed for roll up doors, our V-Belt Hoist Operator features a hand chain for manual use, a maintenance alert system, and a max run timer to prevent over cycling. Available in models up to 1 HP for reliable daily operation.

Curtain

• Slat Profile: 4″ “C” Punched or 3″ flat punched interlocking slats, 22 ga galvanized steel.
• Options: Solid “C” “W” “flat”, Perforated and grilled. Factory installed end locks or wind locks.
• Finish: Galvanized or customizable powder-coat colors.

Bottom Bar

• Standard includes a single or double angle galvanized bottom bar

Brackets

• Material: 3/16″ cold rolled steel or galvanized with ball bearing support
• Shape:  hexagon, round and square
• Finish Options: Galvanized or customizable powder-coat colors.

Guides

• Material: Wall mounting angle 3/16″ x 2″ x2″, cold rolled steel.
• Shape: 14 Ga 1 1/2″ x 2 1/2″ Roll form guide.
• Finish Options: Galvanized or customizable powder-coat colors.

Counterbalance Assembly

Engineered pipe to minimize deflection to 0.03” per-ft of width.
Helical torsion springs with 25% overload factor, grease-packed and mounted on cold-rolled steel shaft.
Tension adjustable externally.
Sealed ball bearings reduce shaft wear.
Cycle life: 20,000 to 400,000.

Hood / Coil Housing

• Material: 22 ga galvanized steel hood to fully close the coil.
• Shape:  hexagon, round and square
• Finish: Galvanized or customizable powder-coat colors.

Note: Hood not recommended abobe the celling

Locking Devices

Standard: Left and right locking pins for pad lock.

Optional: Slide lock on bottom bar.

Applications

Town Gate motor operated doors with punched slat are the ideal security solution for a wide range of commercial and service environments where durability, motor operation, and aesthetic appeal are the key Like:
Retail Storefronts, Shopping Mall Units, Pharmacies and Convenience Stores, Coffee Shops and Take-Out Restaurants, Storage Rooms and Service Closets, Reception or Cashier Windows in Medical Clinics or Parking Facilities.

Functional Benefits

Locking Options
Comes standard with Both sides pins locks for padlock use. Optional slide locks can be added for increased security.

Durable Curtain Slats Assembly
Constructed from 22-gauge galvanized steel, our 4” interlocking punched slat with end lock or wind lock, offer excellent resistance to forced entry and wear. Optional punched slats and reinforcement plates are also available.

Motor Lift Operation
Town Gate offer a frontal Smart motor, frontal motor, tubular motor, gear head motor and belt drive motor build exclusive for this type of door.

Custom Finish Options
Choose from our Powder coating colors to match your brand or storefront aesthetic.

High-Quality Hardware
Equipped with 3/16 steel brackets (16” hex shape or round shape), roll-formed 14-gauge side guides, and a galvanized hood for superior durability.

Town Gate Advantage and Benefit

Town Gate motor operator door was Ingenierie design to minimize friction percentage (%) to ensure easy operation and minimize maintenance required.

After 48 years of combined industry experience, our team has delivered high-performance rolling doors across countless retail and commercial installations. Our reputation is founded on consistent work quality, precision, and customer-first service.

Each door is custom manufactured to meet your exact dimensions, layout, and usage needs. The solid curve slat is design to offer a compact yet highly durable build, reducing ceiling obstruction while enhancing overall security.

We stand behind our manufacturing with a 1-year warranty on materials and work quality and offer optional extended warranties for long-term peace of mind.

As a quality-driven manufacturer, Town Gate Co. adheres to the highest industry standards, maintaining strict quality control throughout our process to ensure lasting performance and reliability you can trust.

Installation Overview

Town Gate doors are built for quick and clean installation in standard masonry or framed openings.

Rolling steel doors are engineered to be durable, strong, and cost-effective—both in installation and long-term maintenance.

Please note: Preparation of openings, structural or miscellaneous steel work, access doors, finish or on-site painting Town Gate installation team can do it if need it.

• TG Frontal Motor
  
  Engineered for performance and reliability, our Smart Motor features 100% copper windings, ensuring enhanced durability and power. Equipped with overheat protection, it automatically shuts off at 110°C and resets at 70°C. The built-in mechanical limit switch allows precise positioning for both open and close cycles. Operable via 3 station button (Up/Stop/Down), key switch.
  It also includes manual chain operation and clutch release for power outages. Its noise-reduction planetary gear system.
  (Lifting cap. wit out spring 650, 850 and 1050lb.)
  
• TG Smart Motor
  Engineered for performance and reliability, our Smart Motor features 100% copper windings, ensuring enhanced durability and power. Equipped with overheat protection, it automatically shuts off at 110°C and resets at 70°C. The built-in mechanical limit switch allows precise positioning for both open and close cycles. Operable via remote control, 3 station button (Up/Stop/Down), key switch, keypad, wireless app, it also includes manual chain operation and clutch release for power outages. Its noise-reduction planetary gear system.
  (Lifting cap. wit out spring 650, 850 and 1050lb.)
  
• TG tubular motor
  The Tubular Motor is a compact operator designed for rolling doors and counter shutters. It features a built-in hand crank overdrive and offers a limit switch capacity for up to 40 revolutions. This motor is ideal for applications where space is limited, and manual chain hoist is not required.
  
• Lift Master Gear Head Motor
  Our Gear Head Motor is an industrial-duty, gear-reduced jackshaft operator with high starting torque. It offers full overload protection and is removable without affecting limit switch settings. The motor includes a low voltage control circuit (24 VAC) and is factory pre-wired with all electrical components in a NEMA 1 enclosure.
  
• V Belt Lift Master
  Designed for roll up doors, our V-Belt Hoist Operator features a hand chain for manual use, a maintenance alert system, and a max run timer to prevent over cycling. Available in models up to 1 HP for reliable daily operation.

Curtain

• Slat Profile: 4″ Perforated curved or 3″ perforated flat interlocking slats, 22 ga galvanized steel.
• Options: Solid “C” “W” “flat”, Punched and grilled. Factory installed end locks or wind locks.
• Finish: Galvanized or customizable powder-coat colors.

Bottom Bar

• Standard includes a single or double angle galvanized bottom bar

Brackets

• Material: 3/16″ cold rolled steel or galvanized with ball bearing support
• Shape:  hexagon, round and square
• Finish Options: Galvanized or customizable powder-coat colors.

Guides

• Material: Wall mounting angle 3/16″ x 2″ x2″, cold rolled steel.
• Shape: 14 Ga 1 1/2″ x 2 1/2″ Roll form guide.
• Finish Options: Galvanized or customizable powder-coat colors.

Counterbalance Assembly

Engineered pipe to minimize deflection to 0.03” per-ft of width.
Helical torsion springs with 25% overload factor, grease-packed and mounted on cold-rolled steel shaft.
Tension adjustable externally.
Sealed ball bearings reduce shaft wear.
Cycle life: 20,000 to 400,000.

Hood / Coil Housing

• Material: 22 ga galvanized steel hood to fully close the coil.
• Shape:  hexagon, round and square
• Finish: Galvanized or customizable powder-coat colors.

Note: Hood not recommended abobe the celling

Locking Devices

Standard: Left and right locking pins for pad lock.

Optional: Slide lock on bottom bar.

Applications

Town Gate motor operator doors with perforated slat are the ideal security solution for a wide range of commercial and service environments where durability, motor operation, and aesthetic appeal are the key Like:
Retail Storefronts, Shopping Mall Units, Pharmacies and Convenience Stores, Coffee Shops and Take-Out Restaurants, Storage Rooms and Service Closets, Reception or Cashier Windows in Medical Clinics or Parking Facilities.

Functional Benefits

Locking Options
Comes standard with Both sides pins locks for padlock use. Optional slide locks can be added for increased security.

Durable Curtain Slats Assembly
Constructed from 22-gauge galvanized steel, our 4” interlocking perforated slat with end lock or wind lock, offer excellent resistance to forced entry and wear. Optional punched slats and reinforcement plates are also available.

Motor Lift Operation
Town Gate offer a frontal Smart motor, frontal motor, tubular motor, gear head motor and belt drive motor build exclusive for this type of door.

Custom Finish Options
Choose from our Powder coating colors to match your brand or storefront aesthetic.

High-Quality Hardware
Equipped with 3/16 steel brackets (16” hex shape or round shape), roll-formed 14-gauge side guides, and a galvanized hood for superior durability.

Town Gate Advantage and Benefit

Town Gate motor operator door was Ingenierie design to minimize friction percentage (%) to ensure easy operation and minimize maintenance required.

After 48 years of combined industry experience, our team has delivered high-performance rolling doors across countless retail and commercial installations. Our reputation is founded on consistent work quality, precision, and customer-first service.

Each door is custom manufactured to meet your exact dimensions, layout, and usage needs. The solid curve slat is design to offer a compact yet highly durable build, reducing ceiling obstruction while enhancing overall security.

We stand behind our manufacturing with a 1-year warranty on materials and work quality and offer optional extended warranties for long-term peace of mind.

As a quality-driven manufacturer, Town Gate Co. adheres to the highest industry standards, maintaining strict quality control throughout our process to ensure lasting performance and reliability you can trust.

Installation Overview

Town Gate doors are built for quick and clean installation in standard masonry or framed openings.

Rolling steel doors are engineered to be durable, strong, and cost-effective—both in installation and long-term maintenance.

Please note: Preparation of openings, structural or miscellaneous steel work, access doors, finish or on-site painting Town Gate installation team can do it if need it.

Electrical wiring, conduit, fuses, and disconnect switches, fall under the responsibilities of other contractors or trades involved in the project.

• TG Frontal Motor
  
  Engineered for performance and reliability, our Smart Motor features 100% copper windings, ensuring enhanced durability and power. Equipped with overheat protection, it automatically shuts off at 110°C and resets at 70°C. The built-in mechanical limit switch allows precise positioning for both open and close cycles. Operable via 3 station button (Up/Stop/Down), key switch.
  It also includes manual chain operation and clutch release for power outages. Its noise-reduction planetary gear system.
  (Lifting cap. wit out spring 650, 850 and 1050lb.)
  
• TG Smart Motor
  Engineered for performance and reliability, our Smart Motor features 100% copper windings, ensuring enhanced durability and power. Equipped with overheat protection, it automatically shuts off at 110°C and resets at 70°C. The built-in mechanical limit switch allows precise positioning for both open and close cycles. Operable via remote control, 3 station button (Up/Stop/Down), key switch, keypad, wireless app, it also includes manual chain operation and clutch release for power outages. Its noise-reduction planetary gear system.
  (Lifting cap. wit out spring 650, 850 and 1050lb.)
  
• TG tubular motor
  The Tubular Motor is a compact operator designed for rolling doors and counter shutters. It features a built-in hand crank overdrive and offers a limit switch capacity for up to 40 revolutions. This motor is ideal for applications where space is limited, and manual chain hoist is not required.
  
• Lift Master Gear Head Motor
  Our Gear Head Motor is an industrial-duty, gear-reduced jackshaft operator with high starting torque. It offers full overload protection and is removable without affecting limit switch settings. The motor includes a low voltage control circuit (24 VAC) and is factory pre-wired with all electrical components in a NEMA 1 enclosure.
  
• V Belt Lift Master
  Designed for roll up doors, our V-Belt Hoist Operator features a hand chain for manual use, a maintenance alert system, and a max run timer to prevent over cycling. Available in models up to 1 HP for reliable daily operation.

Curtain

• Curtain Profile: 6″ or 9″ Straight or brick pattern Grilled is made with PVC sleave over 5/16 hot dipped galvanized horizontal rods space 2 1/4 ” O C. Aluminum alternated vertical links and continued end link with push nuts to prevent the curtain from leaving the sidetrack
• Options: 6″ or 9″ Aluminum sleave
• Finish: Silver, broce, gold and anodized colors

Bottom Bar

• Standard includes a single or double angle galvanized bottom bar
• 2″ x 3 1/2″extruded aluminum tubular bottom bar.
• Finish: Galvanized or customizable powder-coat colors.

Brackets

• Material: 3/16″ cold rolled steel or galvanized with ball bearing support
• Shape:  hexagon, round and square
• Finish Options: Galvanized or customizable powder-coat colors.

Guides

• Material: Wall mounting angle 3/16″ x 2″ x2″, cold rolled steel.
• Shape: 14 Ga 1 1/2″ x 2 1/2″ Roll form guide.
• Finish Options: Galvanized or customizable powder-coat colors.

Counterbalance Assembly

Engineered pipe to minimize deflection to 0.03” per-ft of width.
Helical torsion springs with 25% overload factor, grease-packed and mounted on cold-rolled steel shaft.
Tension adjustable externally.
Sealed ball bearings reduce shaft wear.
Cycle life: 20,000 to 400,000.

Hood / Coil Housing

• Material: 22 ga galvanized steel hood to fully close the coil.
• Shape:  hexagon, round and square
• Finish: Galvanized or customizable powder-coat colors.

Note: Hood not recommended abobe the celling

Locking Devices

Standard: Left and right locking pins for pad lock.

Optional: Slide lock on bottom bar.

Applications

Town Gate motor operator doors with grilled slat are the ideal security solution for a wide range of commercial and service environments where durability, motor operation, and aesthetic appeal are the key Like:
Retail Storefronts, Shopping Mall Units, Pharmacies and Convenience Stores, Coffee Shops and Take-Out Restaurants, Storage Rooms and Service Closets, Reception or Cashier Windows in Medical Clinics or Parking Facilities.

Functional Benefits

Locking Options
Comes standard with Both sides pins locks for padlock use. Optional slide locks can be added for increased security.

Durable Curtain Slats Assembly
Constructed from 22-gauge galvanized steel, our 4” interlocking grilled slat with end lock or wind lock, offer excellent resistance to forced entry and wear. Optional punched slats and reinforcement plates are also available.

Motor Lift Operation
Town Gate offer a frontal Smart motor, frontal motor, tubular motor, gear head motor and belt drive motor build exclusive for this type of door.

Custom Finish Options
Choose from our Powder coating colors to match your brand or storefront aesthetic.

High-Quality Hardware
Equipped with 3/16 steel brackets (16” hex shape or round shape), roll-formed 14-gauge side guides, and a galvanized hood for superior durability.

Town Gate Advantage and Benefit

Town Gate motor operated door was Ingenierie design to minimize friction percentage (%) to ensure easy operation and minimize maintenance required.

After 48 years of combined industry experience, our team has delivered high-performance rolling doors across countless retail and commercial installations. Our reputation is founded on consistent work quality, precision, and customer-first service.

Each door is custom manufactured to meet your exact dimensions, layout, and usage needs. The solid curve slat is design to offer a compact yet highly durable build, reducing ceiling obstruction while enhancing overall security.

We stand behind our manufacturing with a 1-year warranty on materials and work quality and offer optional extended warranties for long-term peace of mind.

As a quality-driven manufacturer, Town Gate Co. adheres to the highest industry standards, maintaining strict quality control throughout our process to ensure lasting performance and reliability you can trust.

Installation Overview

Town Gate doors are built for quick and clean installation in standard masonry or framed openings.

Rolling steel doors are engineered to be durable, strong, and cost-effective—both in installation and long-term maintenance.

Please note: Preparation of openings, structural or miscellaneous steel work, access doors, finish or on-site painting Town Gate installation team can do it if need it.

Electrical wiring, conduit, fuses, and disconnect switches, fall under the responsibilities of other contractors or trades involved in the project.

• TG Frontal Motor
  
  Engineered for performance and reliability, our Smart Motor features 100% copper windings, ensuring enhanced durability and power. Equipped with overheat protection, it automatically shuts off at 110°C and resets at 70°C. The built-in mechanical limit switch allows precise positioning for both open and close cycles. Operable via 3 station button (Up/Stop/Down), key switch.
  It also includes manual chain operation and clutch release for power outages. Its noise-reduction planetary gear system.
  (Lifting cap. wit out spring 650, 850 and 1050lb.)
  
• TG Smart Motor
  Engineered for performance and reliability, our Smart Motor features 100% copper windings, ensuring enhanced durability and power. Equipped with overheat protection, it automatically shuts off at 110°C and resets at 70°C. The built-in mechanical limit switch allows precise positioning for both open and close cycles. Operable via remote control, 3 station button (Up/Stop/Down), key switch, keypad, wireless app, it also includes manual chain operation and clutch release for power outages. Its noise-reduction planetary gear system.
  (Lifting cap. wit out spring 650, 850 and 1050lb.)
  
• TG tubular motor
  The Tubular Motor is a compact operator designed for rolling doors and counter shutters. It features a built-in hand crank overdrive and offers a limit switch capacity for up to 40 revolutions. This motor is ideal for applications where space is limited, and manual chain hoist is not required.
  
• Lift Master Gear Head Motor
  Our Gear Head Motor is an industrial-duty, gear-reduced jackshaft operator with high starting torque. It offers full overload protection and is removable without affecting limit switch settings. The motor includes a low voltage control circuit (24 VAC) and is factory pre-wired with all electrical components in a NEMA 1 enclosure.
  
• V Belt Lift Master
  Designed for roll up doors, our V-Belt Hoist Operator features a hand chain for manual use, a maintenance alert system, and a max run timer to prevent over cycling. Available in models up to 1 HP for reliable daily operation.